Lorex Technology SHS-4QM2 Bedienungsanleitung PDF herunterladen (Seite 20)

20

Menu Setup

Motion Setup

• SENSITIVITY - Sets the Motion

Sensitivity. Press the

⇑ ⇓ buttons to

navigate, and press the ⇐ ⇒ buttons

to set the values (min~max).

• VELOCITY - Sets the Motion Velocity.

Press the

⇑ ⇓ buttons to navigate, and

press the

⇐ ⇒ buttons to set the values

(min~max).

• MASKING AREA - Turns on MASKING

for the specified area (by X,Y axis).

Press the

⇑ ⇓ buttons to navigate, and

press the ⇐ ⇒ buttons to set the values.

• Press the MENU button to EXIT. All

settings will be saved.

Event Setup

Configuration for Alarm Reporting:

• ALARM - A report is generated when the

power is turned ON

• LOSS - A report is generated when a

camera has Signal Loss.

• MOTION - A report is generated when a

camera detects motion.

• BUZZER HOLD TIME - Sets the audible

buzzer time (when motion is detected)

between 0~99 seconds.

• REPORT HOLD TIME - Enables or

Disables the Report Hold time from

0~99 seconds

• ALARM POLARITY - Reports on the

Power On Alarm. Check off all 4 Alarm

Boxes, and set the POLARITY to HIGH.

If the POLARITY is set to LOW, the

POWER ON ALARM will not function.

MOTION SETUP

DETECTION TIME

ALWAYS ON

ON: 00:00

OFF: 13:00

SENSITIVITY: 0

VELOCITY: 0

MASKING AREA

X,Y (00,00)

⇑⇓ SELECT ⇐ ⇒ ADJUST MENU EXIT

CAMERA 1

EVENT REPORT

BUZZER / REPORT CONTROL

BUZZER HOLD TIME: 01 SEC

REPORT HOLD TIME: 01 SEC

ALARM POLARITY: LOW

CHANNEL

ALARM

LOSS

MOTION

1 2 3 4

⇐⇑⇓⇒ SELECT

ENTER DISABLE

MENU EXIT

1 2 ... 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare