Lorex Technology SG21FD3044-161 Bedienungsanleitung PDF herunterladen (Seite 21)

NOTE: Some alternative brand PIR motion sensors have a default setting of N.C

(normally closed). In order to activate the alarm on such a PIR motion sensor, change

the setting to N.C

7.5 MOTION SET

This submenu allows you to enable / disable the Pixel-based Motion Detection function by

channel and set its Sensitivity level.

a) MOTION : Selecting [OFF] disables the Pixel-based Motion Detection function. Selecting

[OSD] will allow motion to trigger alarms, and the letters “MD” will appear on the screen

of the camera location where the motion is taking place. A third option, [OSD+BUZZER]

will display “MD” and emit a buzzer sound in the event that motion is detected.

b) CHANNEL : Select which channels will have the Pixel Motion Sensing feature activated.

The Sensitivity level can be set to zero for a channel, which will disable the Motion

Sensing ability for that channel.

c) SENSITIVITY : Select the sensitivity level by channel. Level 05 is the highest sensitivity,

Level 01 is the least sensitive. Level 00 deactivates Motion Sensing.

d) AREA : Select the area of the screen where the Pixel Motion Sensing feature will be

active. The digits below represent the area on the screen where motion is detected.

[00] - Whole screen. [01] - Top left side of screen.

[02] - Top right side of screen. [03] - Bottom left side of screen.

[04] - Bottom right side of screen. [05] - Center of the screen.

7.6 SYSTEM SET (I)

This sub-menu allows you to configure various preferences on the system, related to Monitor

settings.

a) KEY BUZZER : When set to [Y], the system will make a sound when a key is pressed on

the remote control or on the main panel of the monitor.

b) LOSS BUZZER : When set to [Y], the system will make a sound when a camera

becomes disconnected.

c) QUAD LINE : Activates and deactivates the border line in Quad mode.

d) BLANK COLOR : Choose between blue, gray or black as the background screen color in

Menu Mode.

e) TITLE/TIME : Change the location of on-screen display for Time/Date and camera titles.

T/R/B/L represents Top / Right / Bottom / Left respectively. Therefore, for example, the

setting “TR/BL” would display the Title in the Top-Right corner of the screen, and the

Time in the Bottom Left corner.

f) PAN/TILT(CH1) : Activates Pan/Tilt mode to become accessible.

NOTE: if the PAN/TILT function is enabled, CH1 will not trigger when an external alarm

occurs.

g) ALARM OUT : Select the Alarm Out setting, which is defaulted to NO (Normally Open) for

triggering external devices.

03 04

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Keine Kommentare

Lorex Technology SG21FD3044-161 Bedienungsanleitung Seite 21